ZKZ Jewelry Is A Leading Lab Grown Diamond And Custom Jewelry Manufacturer
Request a Quote

My pendant hangs sideways: how can I fix it?

925 sterling silver jewellery, set with lab grown diamonds and made in our own Shenzhen workshop.

My pendant hangs sideways: how can I fix it?
Posted on by test111

Talk · Troubleshooting

QThe questionEditorial scenario written by the ZKZ team. Not a customer post.

A wearer has a sterling silver diamond pendant that turns to face sideways or backwards on its chain and will not sit flat against the chest. They want to know why it happens and whether it can be fixed.

ZKZ JewelryZKZ Editorial TeamMain answer · Product & gemmology desk

A pendant hangs sideways when the bail, the chain or the balance of the pendant lets it rotate. The usual causes are a bail that is too large or too loose for the chain, a flat chain that twists, a pendant that is heavier on one side, or a clasp that cannot turn. A jeweller can often fix it by changing the bail or the chain, and you can improve it at home with a simple check.

Why pendants turn

  • A large or open bail. If the bail is much wider than the chain, the pendant swings and rotates freely.
  • A bail that is soft or bent. A bent bail can hold the pendant at an angle.
  • A flat or twisted chain. Flat chains twist and carry the pendant with them.
  • Weight balance. A pendant heavier at one side, or one whose centre of gravity is in the wrong place, will tilt.
  • A fixed clasp. If the clasp or a ring cannot turn, the chain twists.
  • Wear. A worn jump ring or a bail can loosen over time.

What to check at home

  1. Take the chain off and let the pendant hang from your finger. See if it hangs straight or tips.
  2. Look at the bail: is it closed, even and centred?
  3. Check the chain: is it twisted or flat?
  4. Try a different chain of the same thickness. Round or box chains twist less than flat cable chains.
  5. Check how the clasp sits. A small ring or a swivel at the end lets the chain turn.

Fixes a jeweller can make

  • Replace the bail with one of a size that fits the chain.
  • Add a small jump ring between bail and pendant to adjust the hang.
  • Re-solder or reposition a bail that is off-centre.
  • Adjust the balance by changing where the bail is attached.
  • Choose a different chain style, such as a round or box chain.

Our advice Do not try to bend a bail with pliers at home. It is thin silver and can crack, and you might lose the pendant.

When it is not a fault

It depends A pendant that moves a little with you is normal. A pendant that is a drop or an irregular shape may turn more than a round one. Some people accept this, and others prefer a fixed design.

Uncertain We cannot tell the cause without seeing the pendant, but the simple tests above usually point to the bail or the chain.

Related reading: Silver Pendant Chains: Matching Weight to Pendant Size · Diamond Pendant Necklace Length and Chain Pairing

Sources

No external standard governs this question, so this answer is editorial advice from the ZKZ team and is labelled that way.

Fact = stated by the cited source. Our advice = editorial recommendation. Uncertain / it depends = limits of what can be said in general.

Other perspectives from the ZKZ team

WSZKZ Editorial TeamWorkshop perspective

Most sideways pendants come down to the bail. A bail that is the right width for the chain, soldered square to the pendant, makes the biggest difference.

SEZKZ Editorial TeamSelection perspective

If you like a pendant to sit flat, choose a design with a fixed, centred bail and a round or box chain. Flat, fine chains are more likely to twist.

CSZKZ Editorial TeamCare & maintenance perspective

Check the bail and jump ring now and then for wear. A worn bail can fail without warning, and then the pendant falls off the chain.

Have a different question? Ask our team, or browse more answers in Talk.